Apparel / PRIVATE-LABEL DEVELOPMENT

Dog winter coat

A padded coat is quoted on fill weight and shell denier before anything else. Both drive cost and both belong on the label, because a buyer comparing two coats cannot see either.

Terracotta / COLOR PREVIEW

Form, material and finish.

Materials Woven polyester shell; virgin or recycled fibre filling; fleece or taffeta lining

Construction Quilted or channel-stitched panel; hook-and-loop or buckle closure; graded back length

Branding Woven label in the seam or care label; print fill weight only when supported by records

Packaging Custom packaging is available. Format, material, dimensions, logo and barcode placement are agreed for your order.

Typical MOQ 100–500 units; Typical range; confirmed by product, color, size and customization.

Stock-item custom sample Within 7 days

Fully custom sample Within 15 days

Shipping Sea freight, air freight or express courier

Request a quote for this product Download development sheet

Confirm your selected size, material and customization in the quotation.

8 CUSTOM COLOR DIRECTIONS

Choose a color. See it now.

Terracotta

Custom logo

Custom packaging

Logo choices describe your requested direction. The product branding specification below lists confirmed methods; other methods require review for the selected material and placement.

Digital color preview for development planning. Confirm final color, material, logo process and packaging on a physical sample and written specification.

01 / PURPOSE & CONSTRUCTION

Designed around
the daily routine.

The top of an apparel range, priced on a stated material figure.

Quilted or channel-stitched panel; hook-and-loop or buckle closure; graded back length. Start by documenting the intended pet, environment and expected care routine.

Warmth is not a rating. State fill weight and construction; make no temperature claim.

02 / CUSTOMIZATION

The details make it yours.

We offer these customization methods. Material and process combinations, placement and artwork dimensions are confirmed for your project.

Material direction

Woven polyester shell; virgin or recycled fibre filling; fleece or taffeta lining

A recognizable identity

Woven label in the seam or care label; print fill weight only when supported by records

Custom packaging for your channel

Custom packaging is available. Format, material, dimensions, logo and barcode placement are agreed for your order.

03 / SIZING

Measure first.
Make with clarity.

Back length: 25–60 cm, sampled in size bands. Chest and belly coverage are specified separately.

Reference sizes for selection and sampling. Final dimensions, tolerances and material combinations are agreed in the written specification.

Factory reference: FSR-039 · 10 October 2026

Supply target values and units for a sample brief. Confirm tolerances and size grading against the physical approval sample.

Measurement to define	Approval record
Back length	Target + unit + tolerance
Fill weight (gsm)	Target + unit + tolerance
Shell denier	Target + unit + tolerance
Finished weight	Target + unit + tolerance
Packed carton volume	Target + unit + tolerance

04 / SAMPLE REVIEW

A better brief.
A clearer check.

Loft recovery after vacuum-pack compression, closure hold, wash shrinkage.

Confirm wash temperature and drying method for shell and fill separately.

Agree the inspection method, applicable requirements and acceptance criteria for your actual market and product. Test reports must correspond to the approved material and finished item.

Get the sample review checklist

05 / PACKAGING

Make the last detail count.

Confirm unit packaging, product identification, care copy, barcode, carton count and packed dimensions. Approve artwork on the actual packaging format.

06 / TIMELINE

A schedule built on approvals.

Brief → material review → sample → revision → pre-production approval → inspection → shipment handover. Sampling and production dates depend on the agreed specification and approvals.

See every stage

PRODUCT EVIDENCE MATRIX

Approve evidence, not assumptions.

Use this checklist to confirm an order-specific product specification.

Each item should point to a physical sample, drawing, material record, test method or approved artwork. Evidence is confirmed for the exact product and order; a category claim alone is not enough.

Open the supplier trust center

Decision	What your team should approve	Evidence to retain
Product identity	SKU, intended use, target market and approved sample version	Signed specification and sample reference
Materials	Fiber or polymer type, grade, thickness, finish and color reference	Supplier record, swatch or order-specific test report
Dimensions & fit	Back length: 25–60 cm, sampled in size bands. Chest and belly coverage are specified separately.	Dimension drawing, size chart and tolerance record
Construction	Quilted or channel-stitched panel; hook-and-loop or buckle closure; graded back length	Seam, hardware or assembly checkpoints with photos
Performance & care	Loft recovery after vacuum-pack compression, closure hold, wash shrinkage; Confirm wash temperature and drying method for shell and fill separately	Agreed method, acceptance criteria and care copy
Branding & packaging	Logo method, placement, artwork, labels, barcode, unit pack and carton count	Approved artwork and packaging sample

COMMERCIAL TERMS

Confirm the order in writing.

Published planning ranges help you start. Final values belong in the product-specific quotation and purchase agreement.

Term	Published planning information	What must be confirmed
MOQ	100–500 units	Typical range; confirmed by product, color, size and customization.
Stock-item custom sample	Within 7 days	Artwork, available base item, sample fee and delivery method
Fully custom sample	Within 15 days	Specification freeze, tooling or development fee and revision scope
Bulk production	Confirmed in quotation	Quantity by SKU/color/size, approval date and production schedule
Payment & trade terms	Not publicly stated	Currency, deposit/balance, Incoterm, named place and banking details on formal documents
Packing & freight	Sea freight, air freight or express courier	Unit pack, carton count, carton dimensions, marks, route and freight responsibility

BEFORE YOU REQUEST A QUOTE

Questions buyers ask about the dog winter coat.

What is the MOQ for a private-label dog winter coat?

Typical MOQ is 100–500 units. Typical range; confirmed by product, color, size and customization.

How long does a dog winter coat sample take?

A stock-item custom sample takes within 7 days after the artwork and details are confirmed. A fully custom sample takes within 15 days after the specification is confirmed.

What materials and construction can a dog winter coat use?

Woven polyester shell; virgin or recycled fibre filling; fleece or taffeta lining. Quilted or channel-stitched panel; hook-and-loop or buckle closure; graded back length.

What should be checked on a dog winter coat sample?

Loft recovery after vacuum-pack compression, closure hold, wash shrinkage. Confirm wash temperature and drying method for shell and fill separately.

What is a dog winter coat not meant for?

Warmth is not a rating. State fill weight and construction; make no temperature claim.

GUIDES FOR THIS PRODUCT

Do dogs need coats in winter? Which dogs, and when Does my dog need boots or a raincoat for everyday walks? Fleece jacket, knit sweater or padded coat: which dog winter layer to private label first